KNC-p3LR_IR Low Profile IP Camera
·
Quick Operation Guide
14
14
Use a plier to remove the break-away part and route the cables via
side outlet (as shown in Figure 2-4) if no cable hole is drilled in step 1,
and connect the corresponding cables.
Figure 2-6
Remove a Section of the Edge
6.
View the image via the web browser.
7.
Slightly loosen the hex screw beside the WPS/RESET button to
adjust the direction of view.
8.
Use the supplied adjusting tool for ease of adjusting the pan [
±
30
°
], tilt [0~80
°
], and rotation direction [0~360
°
].
Figure 2-7
3-Axis Adjustment
Adjusting Tool
Rotation
Tilt
Pan
