8.Operating Camera
6. V END
•
Set the vertical starting point for motion detection area.
•
Select desired position from 6 to 128 in WINDOW0~3.
•
Select desired position from 0 to 7 in BLOCK.
7. SENSITIVITY
•
Increase or decrease detection sensitivity value.
•
Can be set from 1 (low response) to 15 (sensitive).
8. ALARM
•
Select desired alert type.
•
OSD : The WINDOW or BLOCK will be displayed on the screen
when motion is detected.
•
SERIAL : Alert packet is transmitted via RS-485 when motion is
detected.
•
OSD&SERIAL : Use OSD and SERIAL feature simultaneously.
9. INITIAL
•
Initializes the changed category in MOTION DETECT menu.
•
Press the NEAR/FAR button to confirm.
36
37