BRAKING
1. Release the throttle.
2. Apply the clutch lever gradually in-
creasing the pressure.
3. Apply the front and rear brake at the
same time.
!
WARNING
•
Avoid hard or sudden braking (espe
-
cially when cornering) otherwise the
motorcycle may skid.
• Railroad crossings, street-car rails,
iron plates on road construction si-
tes, and manhole covers become
extremely slippery when wet.
• Therefore slow down when approa-
ching such areas and cross them
with caution.
STOP THE ENGINE
1. Reduce the throttle to 0 position.
2. Pull the clutch lever
3. Switch the gear to neutral N
4. Operate the brakes
5. After the vehicle is stopped turn off
the ignition.
CAUTION
Before starting off allow the engine to
warm up otherwise the spark plug and
engine can be damaged early.
PARKING
1. Reduce the throttle to 0 position.
2. Pull the clutch lever
3. Switch the gear to N - neutral
4. Operate the brakes
b) Shifting gears downwards
1. Release the throttle
2. Operate the brakes and reduce the
speed to a appropriate speed.
3. Pull the clutch lever
4. Lift the gear lever down wards to
change to the lower gears.
5. Slowly release the clutch lever and
open the throttle at the same time.
!
WARNING
Always switch one gear only, otherwise
the transmission can be damaged.
ACCELERATION AND DECELERA-
TION
The speed can be adjusted by opening
and closing the throttle. To increase the
speed, turn the throttle grip in direction
(a). To reduce the speed, turn the thrott
-
le grip in direction (b).
OPERATION AND IMPORTANT RIDING POINTS
22
