background image

                                                                                                                             

 

KSN55-C  SERIES  USER  MANUAL

 

WWW.KSNTEK.COM

 

SAFETY WARNING

 

IT IS IMPORTANT TO KNOW

 

AS AN ELECTRONIC AUXILIARY EQUIPMENT FOR 

DATA TRANSMISSION OF SHIP AIS PILOT PLUG,

 

THE PILOT OF SHIP SHOULD 

ALWAYS BE ALERT TO THE TRAFFIC IN THE SURROUNDING SEA AREAS AND 
ENSURE THE SAFETY OF NAVIGATION WHILE USING THIS EQUIPMENT. IN THIS 
REGARD,  THE COMPANY SPECIFICALLY DECLARES THAT IT WILL NOT BEAR 
ANY  SAFETY  ACCIDENTS AND  LEGAL  LIABILITY  ARISING  FROM  THE  USE OF 
THIS EQUIPMENT. 
 

SAFETY POWER ON/OFF:

 PLEASE SWITCH THE MACHINE ACCORDING TO THE 

MANUAL STEPS. MISOPERATION MAY LEAD TO EQUIPMENT DAMAGE. 

INTERFERENCE:

 ALL WIRELESS DEVICES ARE LIKELY TO BE INTERFERED AND 

AFFECTING THE USE OF EQUIPMENT. 

MAINTENANCE OF EQUIPMENT:

 ONLY PROFESSIONAL TECHNICIANS CAN 

REPAIR THE EQUIPMENT OR RETURN TO FACTORY. 

SELECTION OF ACCESSORIES:

 USE FACTORY APPROVED ACCESSORIES AND 

PREVENT BATTERIES FROM BEING USED IN HIGH TEMPERATURE ENVIRONMENT. 

WATERPROOF:

 THIS EQUIPMENT IS WATERPROOF, BUT IT CAN NOT BE PUT INTO 

THE WATER.

 

FEATURES

 

  Independent Dual channel AIS Receiver, receiving channels CH1 87B and CH2 88B AIS 

message; 

  Automatic switch own AIS receiver 

and ship’s AIS pilot plug working mode; 

  The AIS PILOT PLUG female connector with IMO standards, suitable for all ships; 

  Built-in an automatic sensor to correct polarity reversed issue (TX+- or RX+-) in some 

ship's AIS pilot plug socket;   

  LCD true color display for working status; 

  Built-in ROT sensor, Accuracy 0.5°/m, Resolution 0.1°/m; 

  Built-in GNSS, Concurrent reception of up to 3 GNSS (GPS, Galileo, BeiDou),

 

 

  GPS HDOP: Autonomous<2.5m average; SBAS<2.0m average; Speed<0.1m/s; 

  Wi-Fi, Bluetooth and USB all work at the same time and can be closed by menu. 

  Wi-Fi 2.4G,allows Max 3 clients to access at same time; 

  Wi-Fi SSID name and network password can be changed manually; 

  Removable battery 20~40hrs continue working battery status post to App(Supported by 

SEAiq); 

  Own GPS&ROT output at NMEA sentence together with ship's AIS at same time(Can be 

selected ON/OFF in unit menu or Apps)

 

  Water Proof IPX55; 

Summary of Contents for KSN55-C Series












Reviews: