code R30019.101en www.kseniasecurity.com
ed.04/2020
imago wls
Outdoor siren
Installation guide
INTRODUCTION
The imago wireless outdoor siren is an acoustic and optical professional alarm that combines an unique,
extremely compact and slim design (its maximum thickness is 6 cm.) with an advanced technology to obtain
the best possible performance with the highest energy saving: high sound pressure, 1W LED blinker and
auxiliary high-efficiency high efficiency warning LED.
The siren is handled by two microcontrollers:
•
Main process microcontroller
•
Communication microcontroller
imago wireless can use 2 different power supply systems:
•
1. A proprietary 7.5V 8Ah battery pack, not rechargeable (that will must be replaced once discharge)
separately sold as optional;
•
2. External power supply (12Vcc) with 6V 1.2Ah backup acid lead battery.
Warning! Battery may explode if the battery is replaced by an incorrect type or if mistreated. Do not
recharge, disassemble or dispose of in fire. Dispose of used batteries according to the instructions. The
status of the batteries charge and, if present, the level of external power supply are constantly monitored.
Every power supply or battery failure or disconnection is reported to the main system.
imago wireless is equipped with a temperature sensor and communicate to the panel:
•
the temperature value
•
the programmed thresholds.
imago wireless can measure the level of RF signal reception. During the maintenance, if the siren is placed in
a good wireless reception spot, imago beeps at each variation of the Tamper Switch.
imago wireless also presents protections:
•
keep alive periodic signal
•
Anti-opening and anti-removal tamper
Every communication from the imago wls to the main system will be repeated until acknowledged. Despite
of its extremely small size, imago hides a sturdy metal lid-Chamber; also, the plastic material involved (high
quality polycarbonate with UV protection) and the sophisticated design, guarantee durability in all weather
conditions.
