sirena da esterno imago - imago outdoor siren
12
INDEX
Quick Installation Guide P/N: RMX0300004.000 Rev.2
Ksenia Security declares that the
imago
are in compliance with the essential requirements and other relevant provisions of
EN50131‐4 grade 3 CE.
The complete Declaration of Conformity for each Device can be found at:
www.kseniasecurity.com.
Installation of these systems must be carried out strictly in accordance with the instructions
described in this manual, and in compliance with the local laws and bylaws in force.
imago™
has been designed and made with the highest standards of quality and performance
adopted by Ksenia Security. Is recommended that the installed system should be completely
tested at least once a month. Test procedures depends on the system configuration. Ask to
the installer for the procedures to be followed. Ksenia Security srl shall not be responsible for
damage arising from improper installation or maintenance by unauthorized personnel. The
content of this guide can change without prior notice from KSENIA SECURITY.
CERTIFICATIONS
Region Certifications Outdoor siren
imago
TM
series
Europe CE
Europe EN50131‐4 grade 3
INTRODUCTION
p.12 Programmable inputs
p.16
TECHNICAL DATA AND
FUNCTIONS
p.12 Protection and tamper warning
p.16
PARTS IDENTIFICATIONS
p.13 Protection and battery test
p.17
OPERATION
p.14 Soft‐stop function
p.17
Connection clamps
p.15 INSTALLATION
p.17
START UP procedure
p.15 TERMINALS
p.19
Programming
p.16
