EN
39
ENROLL, REMOVE OR CHANGE A WIRELESS DETECTOR
Each kind of detector needs to be assigned to specific belonging group. As
you can see in “Function” paragraph, the groups are associated to the outputs
depending on the configuration preset.
The installator have to associate the detectors with groups which present output
configured on preset
To enroll a detector, please proceed as follow:
• from
Wireless Detector
, press ENTER and browse the menu till
Enroll
. Press
ENTER to confirm.
• the system shows the first slot available
e.g. the following screen will displayed if there aren’t detectors
so the first detector will be enrolled
(
detector number 1
).
By pressing ENTER, the device will wait the “end of sabotage” signalisation from a
detector among those supported. the following screen will displayed:
the dots on second row flow to indicate the running
process
In case of full slots, so 32 detectors are enrolled, the following screen will displayed:
By pressing ENTER or ESC you will return to
Wireless
Detector
men
To enroll a specific detector, when in enrolling mode, it will be necessary to
generate an “end of sabotage” signalisation. To do that, generally, just insert
battery on detector and close the cover (
e.g. by assembling the two parts of
poli
magnetic contact
). Anyway, please refer to the manual of the detector you
want to enroll.
Wireless Detector
Detector 1
Enrolling
...
Wireless Detector
Max Detectors
