3 Transport/Temporary Storage/Disposal
3.1 Checking the condition upon delivery
1.
On transfer of goods, check each packaging unit for damage.
2.
In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer (as applicable) and the insurer about the
damage in writing immediately.
3.2 Transport
NOTE
The pressure booster system is mounted on wooden skids and wrapped in plastic
foil for shipping and temporary storage. All connecting points are capped.
DANGER
Pressure booster system tipping over
Risk of injury by falling pressure booster system!
▷
Never suspend the pressure booster system by its power cable.
▷
Observe the applicable local accident prevention regulations.
▷
Give due attention to the weight data and the centre of gravity.
▷
Use suitable and permitted transporting equipment, e.g. crane, forklift or
elevating platform truck.
▷
To transport the pressure booster system, suspend it from the lifting tackle as
illustrated.
Fig. 1: Transporting the system
✓
The system has been checked for in-transit damage.
1.
Make sure the transport equipment is suitable for safely carrying the indicated
load.
2.
Transport the system to the place of installation.
3.
Attach the system to the lifting tackle as shown, lift it off the wooden skids and
dispose of the wooden skids.
4.
Use suitable lifting equipment to lift the system and carefully put it down at the
place of installation.
3 Transport/Temporary Storage/Disposal
10 of 40
Surpress Feu SFE.3
