3 Transport/Temporary Storage/Disposal
14 of 68
Multitec A SX
If properly stored indoors, the pump set is protected for three months (please refer
to order or order confirmation).
New pumps/pump sets are supplied by our factory duly prepared for storage.
For storage periods exceeding three months, the pump set is preserved as specified in
the purchase order (please refer to order or order confirmation).
3.3 Return to supplier
1.
Drain the pump as per operating instructions.
2.
Always flush and clean the pump, particularly if it has been used for handling
noxious, explosive, hot or other hazardous fluids.
3.
If the fluids handled by the pump leave residues which might lead to corrosion
damage when coming into contact with atmospheric humidity, or which might
ignite when coming into contact with oxygen, the pump set must also be
neutralised, and anhydrous inert gas must be blown through the pump for
drying purposes.
4.
Always complete and enclose a certificate of decontamination when returning
the pump (set).
(
ð
Section 11, Page 65)
Always indicate any safety and decontamination measures taken.
NOTE
If required, a blank certificate of decontamination can be downloaded from the
KSB web site at:
www.ksb.com/certificate_of_decontamination
3.4 Disposal
WARNING
Fluids posing a health hazard and/or hot fluids
Hazard to persons and the environment!
▷
Collect and properly dispose of flushing liquid and any residues of the fluid
handled.
▷
Wear safety clothing and a protective mask, if required.
▷
Observe all legal regulations on the disposal of fluids posing a health hazard.
1.
Dismantle the pump (set).
Collect greases and other lubricants during dismantling.
2.
Separate and sort the pump materials, e.g. by:
- Metals
- Plastics
- Electronic waste
- Greases and other lubricants
3.
Dispose of materials in accordance with local regulations or in another
controlled manner.
Summary of Contents for Multitec A SX
Page 1: ...Sprinkler Pump Multitec A SX Installation Operating Manual ...
Page 67: ......
