KSB Deep Lift System, Installation & Operating Manual

Page: 7 / 34

2 Safety
7 of 34
Deep Lift System
2553.89/04-EN
2 Safety
!
DANGER
All the information contained in this section refers to hazardous situations.
In addition to the present general safety information the action-related safety
information given in the other sections must be observed.
2.1 General
▪ This operating manual contains general installation, operating and maintenance
instructions that must be observed to ensure safe operation of the system and
prevent personal injury and damage to property.
▪ Comply with all the safety instructions given in the individual sections of this
operating manual.
▪ The operating manual must be read and understood by the responsible specialist
personnel/operators prior to installation and commissioning.
▪
The contents of this operating manual must be available to the specialist
personnel at the site at all times.
▪
The operator is responsible for ensuring compliance with all local regulations not
taken into account.
2.2 Intended use
▪
The lifting accessories must only be used within the limits described in this
installation/operating manual.
▪
Only use lifting accessories which are in perfect technical condition.
▪ Only use the lifting accessories in the fluid described in the data sheet or product
literature.
▪ Consult the manufacturer about any other modes of use not described in the
data sheet or product literature.
▪
Never exceed the permissible application and operating limits specified in the
data sheet or product literature regarding temperature, etc.
▪
Observe all safety information and instructions in this manual.
2.3 Personnel qualification and personnel training
All personnel involved must be fully qualified to transport, operate, maintain and
inspect the equipment this manual refers to. The responsibilities, competence and
supervision of all personnel involved in operation, maintenance and inspection must
be clearly defined by the operator.
Deficits in knowledge must be rectified by means of training and instruction
provided by sufficiently trained specialist personnel. If required, the operator can
commission the manufacturer/supplier to train the personnel.
Training on the product must always be supervised by specialist technical personnel.
2.4 Consequences and risks caused by non-compliance with these operating
instructions
▪ Non-compliance with these operating instructions will lead to forfeiture of
warranty cover and of any and all rights to claims for damages.
▪ Non-compliance can, for example, have the following consequences:
– Risk of load or lifting accessory components falling down
– Risk of lifting accessories tipping over if positioned on inclined surfaces and/
or if not in a sufficiently stable position
– Risk of crushing and shearing injuries by moving parts or by parts under
tension
– Risk to health and environment from hazardous fluids or substances
– Failure of important product functions