Caution
5
Use only the accompanying original bolts; non-compliance will result in loss of warranty cover.
Fig. 7
Fitting the contact piece
Grub screw (7)
Contact piece (5)
Hexagon nut (9)
-- Turn the hexagon nut (9) onto the grub screw (7), and slide the contact piece (5) onto the grub screw (7).
-- Slip the assembly from above into the slot in the mounting bracket (1).
-- Now, turn the grub screw (7) all the way into the fixing plate (4), allowing part of it to protrude.
-- Firmly tighten the hexagon nut (9).
-- Position the mounting bracket (1) such that the contact piece (3) is not blocked. The contact piece (3) must be able to rotate on
the grub screw (7).
-- Now, bolt down the mounting bracket (1); see also Fig. 6).
Fig. 8
Fitting the limit switch(es)
Limit switch (10) ”OPEN”
Socket head cap screw (10) with
serrated lockwasher (12) and
hexagon nut (13)
Limit switch (10)
”CLOSED”
The standard set includes one limit switch (10). A second limit switch is available on option.
Install the limit switch (10; at bottom for ”CLOSED” position or at top for ”OPEN” position):
There are two socket head cap screws (11), each with a serrated lockwasher (12) and a hexagon nut, (13) per limit switch set.
-- The mounting bracket (1) has slotted holes to facilitate setting of the limit switches (10).
-- Mount the limit switches (10) in the desired switching positions, and loosely tighten screws.
Note: The set includes sufficient screws for two limit switches.
