4 Transport/Temporary Storage/Disposal
12 of 36
BOA-Control/ BOA‑Control IMS
4 Transport/Temporary Storage/Disposal
4.1 Checking the condition upon delivery
1. On transfer of goods, check each packaging unit for damage.
2. In the event of in-transit damage, assess the exact damage, document it and
notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.
4.2 Transport
The valves are delivered with the valve disc in the closed position. BOA-Control IMS
valve sizes up to and including DN 50 are packaged in cardboard boxes. The line
connection ports of BOA-Control IMS size DN 65 and above are closed with caps. The
valves are supplied ready for operation. Original spare parts are only ready for
operation following assembly/installation and subsequent shell and leak testing of
the valve.
DANGER
The valve could slip out of the suspension arrangement
Danger to life from falling parts!
▷
Only transport the valve in the specified position.
▷
Never attach lifting accessories to the handwheel.
▷
Observe the information on weights, centre of gravity and fastening points.
▷
Observe the applicable local accident prevention regulations.
▷
Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.
▷
For actuated valves observe the relevant actuator operating manual.
CAUTION
Damage to the sensors
Measuring impossible
▷
Do not use lifting accessories in the area of the sensors, the cables and the
measurement bosses.
CAUTION
Incorrect transport of valve model for drinking water applications, BOA-Control
Damage to the electrostatic plastic coating!
▷
Do not remove the flange caps for transport.
▷
Avoid contact with sharp objects and edges.
To transport the valve, suspend it from the lifting tackle as illustrated.
