KSB Amamix direkt Installation & Operating Manual Download Page 28

Page: 28 / 52

Servicing/Maintenance

7.1

Safety regulations

The operator ensures that all maintenance, inspection and installation work is
performed by authorised, qualified specialist personnel who are thoroughly familiar
with the manual.

DANGER

Sparks produced during maintenance work

Explosion hazard!

▷

Always perform maintenance work on explosion-proof submersible mixers
outside potentially explosive atmospheres only.

DANGER

Improper transport

Danger to life from falling parts!

Damage to the submersible mixer!

▷

Use the attachment point provided (lifting lug or bail) for attaching lifting
accessories.

▷

Never suspend the submersible mixer by its power cable.

▷

Never use the lifting ropes included in KSB's scope of supply for lifting loads
other than the KSB product supplied.

▷

Safely attach lifting ropes to the submersible mixer and crane.

▷

Protect the power cable against damage.

▷

Maintain adequate safety distance during lifting operations.

WARNING

Submersible mixer started up inadvertently

Risk of injury by moving parts!

▷

Always make sure the electrical connections are disconnected before carrying
out work on the submersible mixer.

▷

Make sure that the submersible mixer cannot be started up accidentally.

WARNING

Fluids posing a health hazard or hot fluids

Risk of personal injury!

▷

Observe all relevant laws.

▷

Take appropriate measures to protect persons and the environment.

▷

Decontaminate submersible mixers used in fluids posing a health hazard.

NOTE

Special regulations apply to repair work on explosion-proof submersible mixers.

Modification or alteration of the submersible mixers may affect explosion protection and

is only permitted after consulting the manufacturer.

NOTE

A regular maintenance schedule will help avoid expensive repairs and contribute to

trouble-free, reliable operation with a minimum of maintenance expenditure and work.

7 Servicing/Maintenance

28 of 52

Amamix® direkt

Goodnal STP ST041 Biological Treatment (KSB Amamix Direct Installation and Operation Manual) Vendor Manual

Q-Pulse Id VM385

Active 29/10/2013

Page 28 of 52

Summary of Contents for Amamix direkt





















































Search results

Summary of Contents for Amamix direkt

Reviews:

Related manuals for Amamix direkt

Brands by name

Popular brands

KSB Amamix direkt, Installation & Operating Manual

Search results

Summary of Contents for Amamix direkt

Reviews:

Related manuals for Amamix direkt

Brands by name

Popular brands