7
6
ADJusTING THE WATER TEMPERA-
fAucET INsTAllATIoN
6
Proceed to mounting the faucet on the
eccentric unions.
7
tighten the nuts carefully with a
30mm wrench.
If Your model Is aPollo medIcal B/e tHe faucet sPout Is alreadY assemBled.
8
for THERMA II:
mount the spout to its location in the
faucet body, and tighten the allen
screw/s using the allen key provided
in the packaging.
sTEP 2 – coNNEcTING THE WATER suPPlY AND oPERATING THE fAucET
1
turn on the central water supply and the
shut-off valves and check for leaks.
2
remove the protective sticker.
If tHe range Is
unsatIsfactorY, refer to tHe sec-
tIon tItled “settIng adJustment”.
the faucet has been factory calibrated to 38°c under ideal installation conditions.
due to variations in site conditions, the mixed water temperature may need adjustments
to match the site conditions and make sure that it is safe.
1
unscrew the regulation knob screw
and remove the regulation knob.
2
Proceed to achive a 38°c settings
by turning the spindle and
measuring the water temperature
with a thermometer.
note: make sure always to
use a thermometer with
proven accuracy.
3
assemble the regulation knob to
the 38°c position. the anti scalding
knob must correspond to the 38°c
stop in the stop ring, without mov-
ing the spindle.
4
screw the regulation knob screw
and tighten it.
THE fAucET Is NoW cAlIbRATED AccoRDING To THE sITE sPEcIfIc coNDITIoNs.