KS KMPS-1-64 Series, Instruction Manual

Page: 15 / 40

KMPS-1-64 Manual
12/18 KM 8000 Rev. A Page 15 of 40
Copyright © 2018 Kulite Semiconductor Products, Inc.
All Rights Reserved.
ADdress xx
Sets or returns the address to xx where xx is any 2-digit hexadecimal
number
Set in programming mode only. Must reset to take effect.
CHannel a,b,c,…
Sets or returns the active channels for streaming where a,b,c... is a comma
separated list of all the channels which are active. CHannel * resets the
channel count to all channels. See section 4.5 for more details.
DAte m x
yy/yy/yy Sets or returns the MAnufacture, CAlibration, or DUe date for each module
m. Manufacture date is not settable. See section 4.9 for more details.
EEprom xxxx
yyyy Set or returns the value yyyy to EEPROM address xxxx . See section 4.9
for more details.
FOrmat arg
Sets or returns the streaming format. See section 4.2 for more details.
Set in programming mode only.
FUllscale c
Returns the full-scale pressure for channel c. If c is omitted returns value
for all channels.
HEader x
Sets or returns the header settings. See section 4.3 for more details.
Set in programming mode only.
IEna x
Sets or returns the IENA KEY, END, and STATUS used in IENA streaming
format. See section 4.2.6 for more details
MOde arg Sets or returns the mode. See section 4.1 for more details.
OFfset c y
Sets or returns the user offset of channel c. If c is omitted returns the
offset of all channels. See section 4.10 for more details. Set in
programming mode only.
PArt Returns the unit part number.
PRessure c
Returns the pressure for channel c. If c is omitted returns pressure for all
channels.
REset Resets the KMPS.
SAmplerate arg
Sets or returns the pressure sampling rate. See section 4.6 for more
details.