3
2
PacK cONTENTS
PRE-INSTallaTION INfO
Familiarize yourself with the part names and confirm that the parts are included.
1 x Filter
1 x Filter adapter
CHECK CONTENTS
Separate all parts from the packaging and check each part with the “Pack
contents” section.
Pay attention to the different models variations.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your electronic faucet until you
obtain the missing parts.
WARNINgS
Do not install facing a mirror or any other electronic system operated by an
infrared sensor.
To prevent reflection problems, it is recommended to keep a minimum distance
of 1.50 meters between the faucet and any other objects.
PREPARATION FOR INSTALLATION
Flush water supply lines thoroughly before installing the faucet. Do not allow dirt,
Teflon tape or metal particles to enter the faucet.
Shut off water supply.
IMPORTANT
All plumbing is to be installed in accordance with applicable codes and
regulations.
1 x solenoid
and housing
1 x Allen Key
1 x Faucet and attachments
B VERSIONS
E VERSIONS
9V BATTERY BOx
9V SWITCHINg TRANS-
FORMER
