English
12
The display will show logos with the current time.
Regular
Strong
Press
PROG
(r) when done.
Press
PROG
(r) twice, the AUTO program #2 is indicated with a red light (o).
This second preset start time can be used for days with later wake times, ie weekends.
After programming the automatic start time as described above, be sure to prepare the
machine for a brew cycle with water in the tank, coffee in the brew basket, lid closed
and carafe securely in place.
Press the Auto-On button (n) to choose preset number 1 or number 2. You can check
the preset times by pressing
PROG
(r).
The machine will brew automatically at the designated time. The program will need to
be activated when needed again.
Press
PROG
(r) 3 times, the number of hours will blink and the 2 red lights (o) on the
control panel will blink.
Use the H button (p) to change between 1, 2 or 3 hours.
Press
PROG
when done.
This function controls how long the heating plate will continue before automatically
turning off. For best results we recommend brewing only as much coffee as you will
consume in 30-60 minutes. Taste is affected the longer the coffee is allowed to sit on
the heating plate.
This function is designed specifically for small batches, normally less than 6 cups,
where brew cycles become too short to properly extract the coffee taste from the coffee
ground.
To activate press the Aroma button (q), then press On.
Note :
this function cannot be changed once the brew cycle has started.
3- Auto-Off setting (only for model
with glass carafe):
2- Auto-On setting #2:
AROMA FUNCTION
cafetie?re Dahlstrom remanie? US.qxd:KM 8005 franc)ais - copie.qxd 24/08/09 11:50 Page 12
Summary of Contents for KM40
Page 1: ...www krups com EN FR ES...
