background image

 Make sure that the filter

paper does not fold over

when closing the swivel
filter. Otherwise the

water might run be-

tween the filter paper
and the filter holder pro-

ducing a very weak cup
of coffee.

filling The Water Chamber

 Open the hinged water

chamber lid (see figure
6). Pour in the desired
quantity of water (see

figure 7).

 The amount of freshly

brewed coffee delivered

after the brewing

process will always be

slightly less than the
amount put into the
water chamber. This is

due to the minimal
absorption of the water

by the ground coffee.

Therefore, put in a little

more water to begin

with so that you will

have the number of

cups that you desire.

2. Place the glass carafe

with lid in position on
the warming plate.

3. Turn “on” your “IL 

Bistro” using the 

 button. The indicator

light will illuminate
indicating that the

brewing process has

begun (see figure 8).

AUTO SHUT OFF AND
WARM KEEPING
The 

KRUPS “IL 

 Bistro”

is equipped with an auto-

matic shutoff feature that

will turn off the machine
2 hours after the brewing

process has begun. After

two hours the red indicator

light will go out indicating

that the coffee maker is “off”.

Benefits:

This will help prevent the

coffee from losing its
flavor.

Energy saving

Safety feature

As long as the red indi-

cator light above the
“on/off” button is illumi-

nated the coffee will be

kept warm.
If you want to keep your

coffee hot longer, push
the 

 button on

again.

 “WAKE-UP”

TIME

This feature enables you to
enjoy freshly brewed coffee
at any preselected time

within a 24 hour time

period. To use this feature,

follow the instructions

AFTER setting the digital

clock.

1. Press the program button

and a green light will
appear indicating that the
clock is ready to be pro-
grammed. Immediately

press the 

 (hour)

button and then the 

(minute) button to set

the program time (see

figure 9). After a few

seconds the LED clock

will jump back to the

regular time.

The “Wake-Up” time is

now stored in the elec-

tronic memory.

If you want to check the
“Wake-Up” time that has
been programmed,

simply press the pro-
gram button and the

“Wake-Up” time will be

displayed for a few
seconds.

If you wish to change

the “Wake-Up” time,

press the program
button, and proceed as

described in the above
mentioned paragraph.

Preparing “Wake-Up”
Coffee

The enjoy delicious 

Up” coffee that is freshly
brewed and hot, set the

“Wake-Up” time you desire

(see Section setting 

Up time 

l

Put in the ground coffee.

Pill the water chamber

with the desired amount

of water for the amount
of coffee desired.

Place carafe back on

warming plate.

Press the “Auto” button

and the red light will

illuminate (see figure 10).

Summary of Contents for IL Caffe Bistro 867


















Reviews: