Service Manual EF 472
16
R E P A I R S
5
R E P A I R S
The components of the coffee machine are mostly connected with latches, meaning
without screws.
When loosening these connections, proceed with care and patience to avoid
causing any damage.
Designation of spare parts
The components in the following illustrations are indexed with position numbers. The
corresponding designation and spare part number are listed in section "Spare parts" on
page 40.
5.1 Tools and accessories
With the following assortment of tools, all repairs described can be made.
5.2 General disassembly
General disassembly
gives access to the important machine components
is required for the following repair instructions.
Depending on the repair done the machine does not have to be fully disassembled.
This section con-
tains special safety
and assembly notices.
Disregarding them may
lead to injuries and dam-
ages.
•
Ovalscrewdriver
•
TORXscrewdriver
(TX6, TX10, TX20, TX25)
•
Screwdriver with approx. 4 mm tool tip
•
Hexagonal wrench SW 4
•
Flat wrench SW 14, 10 mm AF
•
Torque wrench
•
Longnosed pliers
•
Beaker and towel to catch and wipe
away leaking water
If necessary empty
the water system
first (see page 12).
Before disassembly,
disconnect the
mains plug - the coffee
machine must be voltage
free.
