D
E
FR
N
L
IT
E
N
21
ENGLISH
n
Cappuccino is made with following proportions:
1/3 milk + 1/3 1/3 milk froth.
You can obtain a maximum volume of around 300 ml.
n
Caffe Latte is made with following proportions:
3/5 milk + 1/5 1/5 milk froth.
You can obtain a maximum volume of around 260 ml.
n
Hot milk with frothing is made with following proportions:
3/5 milk + 2/5 milk froth.
KRUPS
SERIE EA9000
20
PREPARING DRINKS
4.1 Information on recipes
n
Depending on the recipes chosen, your Espresso Automatic EA9000 will automatically adjust the
quantity of ground coffee as well as the grinding fineness. We recommend that you use
appropriately sized porcelain cups, ideally preheated. For your milk-based recipes, we recommend
that you use thick glass cups.
Table of drinks and parameters modifiable by the user
4
Hot milk with frothing
Final volume
Milk
Small
180 ml
100 ml
Medium
240 ml
150 ml
Large
310 ml
200 ml
Hot water
Final volume
From 20 ml to 250 ml
COFFEE RECIPES
Number of cups
possible
Possible settings
Volume (ml)
Possible settings
Strength
RISTRETTO
1
20 to 35 ml (per 5 ml)
ESPRESSO
1
2 x 1
40 to 70 ml (per 10 ml)
2x 40 to 70 ml (per 10 ml)
in a single cycle
COFFEE
1
2 x 1
80 to 180 ml (per 10 ml)
2x80 to 180 ml (per 10 ml)
in two cycles
Automatic
Automatic
INSTALLING THE CLEANING LIQUID
n
Press
“Now”
to confirm or
“Later”
to do it later.
n
Open the left door (15). Pull the container (19) and screw the bottle (18) onto
the container.
n
Replace the container back with the bottle and close the door.
n
Do not screw in the bottle fully.
n
The bottle must be positioned in line with the drawer.
AUTOMATIC STEAM NOZZLE CLEANING PROGRAMME
n
Your machine will prompt you to start this programme.
n
To do so, press
“Now“
. The cycle will last about 5 minutes and the screen will
display the progress of the cleaning.
PREHEATING, AUTOMATIC MAINTENANCE, RINSING
n
The machine will start by preheating the circuits, then will carry out an
automatic test and finally will ask you if the appliance needs to be rinsed or
not.
n
Place a container under the coffee nozzles and press YES if this is required.
The rinsing procedure starts and stops automatically, after around 40 ml have
passed through.
n
The main drink selection menu is then displayed on the screen.
h
Important:
Ensure that all of the lids, covers and doors are closed and that all parts of the machine are
fitted correctly before starting to prepare a drink.
!
Note:
If the first use cycle is interrupted before it has fully completed, you will be asked to save certain
parameters again or to confirm certain settings.
!
