Kruger&Matz KM1908, Owner'S Manual, Page: 43 / 156

43
Owner’s manual
EN
DISC OPERATION
1. While in ON mode, press the button on the unit or the SOURcE button on
the remote control repeatedly to select DISc mode.
2. Press the button to open the disc door and place the disc on the disc tray (with
the printed side up).
3. Press the button to close the disc door, the unit will read the disc and play it
automatically.
Note: If the playback does not start automatically, select a title/chapter/track and
then press the button.
USB OPERATION
1. Insert the USB device’s USB plug into the USB socket.
2. Press the
USB button on remote control or button on the unit to select the
USB source.
3. Playback starts automatically. If the playback does not start automatically, select
a title/chapter/track and then press the button
USB Storage Device Data Protection
• Always insert the USB device in the correct direction. Failure to do so may result
in damage to the USB device and this unit.
• Do not remove the USB device while it is being accessed.
• Electrical interference and electrostatic discharges may cause the USB device to
malfunction and suffer damage, resulting in data loss.