Kruger KGV9000, Use And Maintenance Manual

Page: 18 / 41

- 17-
10. MAINTENANCE
10.1 ORDINARY MAINTENANCE
To ensure proper operation of the device, you need to perform some simple operations, in order
to protect the most sensitive elements.
10.1.1 VACUUM CLEANER MAINTENANCE
See chapter 9.3.
10.1.2 BOILER MAINTENANCE
In order to periodically discharge the water and any deposits of material that can be present in the
boiler, it is necessary to drain it. To do so this you have to act as follows:
- Make sure the machine is cold, not under pressure and placed on a flat surface.
- Open the tap (25) on the bottom of the machine.
- Gently shake the machine and drain the water and any deposits in the boiler.
- Close the tap (25) of the boiler.
10.1.3 TANKS MAINTENANCE
In case the generator is not operated for a long time, it is advisable to proceed to clean the tanks,
in order to remove the water present in them, thus avoiding the formation of algae and
incrustations.
10.1.4 MECHANIC FILTER MAINTENANCE
In order to allow always a good inflow of water in the boiler, it is advisable to periodically clean
the mechanical filter located inside the machine. To do this, proceed as follows:
Remove the right side panel by loosening the screws (Fig. 1).
Close the black tap at the top of the filter and unscrew the filter bowl (Fig. 2).
Remove the filter and rinse the cartridge under running water to remove deposits.
Assemble the filter and fit it in the machine, screwing it to the tap.
Open the black tap.
Tighten the screws to close and lock the side panel.
WARNING
:
make sure you have re-opened the tap before closing the side panel.