background image

40

conduits.

9.2.7 

THE BRUSH MOTOR OR THE SUC-

TION MOTOR DOESN’T STOP

 The relay switch is defective. 

 Stop the machine, cutting off the main power 

supply and disconnecting the main battery connec-

tor, and contact the technical service centre.

9.2.8 

THE SQUEEGEE DOESN’T CLEAN OR 

DRY EFFICIENTLY

 The squeegee blades are worn or are dragging 

solid dirt.

 Replace or clean them.

 The squeegee adjustment is not correct; the  

advancement must be exactly perpendicular to the 

running direction.

 Adjust the squeegee.

 The suction hose, the squeegee conduit or the  

inspection compartment is clogged. 

 Clean out and remove any obstructions from the 

conduits.

9.2.9 

THE BATTERY CHARGER DOESN’T 

WORK

 The battery charge doesn’t start. 

 Check that the battery charger is connected to 

the battery. Consult the battery charger manual. 

9.2.10  THE BATTERIES DO NOT CHARGE 

OR DO NOT HOLD A CHARGE

 At the end of the charging process, the battery is 

not correctly charged (see the battery manufactu-

rer’s instruction-maintenance manual)

 Check the battery charger error message and 

check the data indicated on the display (see the 

battery charger’s instruction manual).

 The batteries are new and do not generate 100% 

of the rated performances.

 The accumulator reaches the maximum perfor-

mance after 20-30 complete charge cycles.

 The electrolyte has evaporated and does not  

completely cover the plates.

 Check the battery manufacturer’s use and main-

tenance manual.

 There are significant differences in density among 

the various elements. 

 Replace the damaged battery.

Always consult the battery and battery charger use 

and maintenance manual. If this does not solve the 

problem, contact the authorised technical service 

centre. 

The manufacturer CANNOT solve problems 

caused by using batteries and battery char-

gers that were not directly supplied.

Summary of Contents for KF 675BBC















































Reviews: