Krüger & Matz KM1808, Owner'S Manual

Page: 44 / 144

44
Owner’s manual
EN
Note:
• The device will also be disconnected when the device is moved beyond the
operation range.
• If you want to reconnect the device to the unit, place it within the operational range.
• The operational range between this unit and a Bluetooth device is up to 8 meters.
• compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can reduce the operational range.
• keep this unit away from any other electronic device that may cause interference
• If a connection exist, press the "PAIR" button on the remote control or press and
hold the button on the unit to re-activate the pairing mode, the connection
will be interrupted.
• If no other Bluetooth device pairs with this player within two minutes, the player
will recover its previous connection.
• When connected to an external device, the display shows "BT".
• If the connected Bluetooth device supports Advanced Audio Distribution Profile
(A2DP), you can listen to the music stored on the device through the player.
• If the external device supports Audio Video Remote Control Profile (AVRCP), you
can use the player’s remote control to play music stored on the device.
SET SLEEP TIMER
This unit can switch to standby mode automatically after a set period.
When the unit is turned on, press SLEEP button repeatedly to select a preset period
(in minutes):
120 > 90 > 60 > 45 > 30 > 15 > 00
• Press the SLEEP button to view the remaing time before switch off.
• To deactivate the sleep timer, press SLEEP button repeatedly until [SLEEP 00] is
displayed.
SET THE ALARM TIMER
This un
it can be used as an alarm clock. you can select DISc, USB, DAB or TUNER
as alarm source.
1. In standby mode, press and hold the TIMER button until [TIMER SET] scrolls on
the display. Then the hour digits flash.
2. Press / button on the remote control to adjust the hour digits, and then press
the TIMER button on the remote control to confirm, the minute digits will flash
on the display.
3. Press the / buttons on the remote control to adjust the minute digits, and
then press the TIMER button on the remote control to confirm.
4. Press the / buttons on the remote control to select:
• TUNER (to wake to your selected FM Radio Station)
• DAB (to wake to your selected DAB Radio Station)