Krüger & Matz KM1598D, Owner'S Manual, Page: 40 / 120

40
Owner’s manual
EN
SET SLEEP TIMER
This unit can switch to standby mode automatically after a set period.
When the unit is turned on, press SLEEP button repeatedly to select a preset
period (in minutes):
120 > 90 > 60 > 45 > 30 > 15
When sleep timer is activated, the “SLEEP” is displayed.
To deactivate the sleep timer, press SLEEP button repeatedly until [SLEEP
OFF] is displayed.
SET THE ALARM TIMER
This unit can be used as an alarm clock. You can select DISC, USB or TUNER
as alarm source.
1. In standby mode, press and hold the
TIMER
button until [TIMER SET] (set
timer) scrolls on the display and the source is displayed, e.g. DISC.
2. Press
VOL+/VOL-
button on the remote control to select source.
3. Press
TIMER
button, the hour indicator will blink.
4. Set the hour with the
VOL+/VOL-
buttons on the remote control.
5. Press
TIMER
button, the minute indicator will blink.
6. Repeat above steps 4-5 to set the minute.
7. Repeat above steps 4-5 to set the alarm volume.
Activate / deactivate alarm timer
In the standby mode, press
TIMER
button repeatedly.
• If timer is activated, the icon is displayed.
• If timer is deactivated, the icon disappears.
Note:
• To exit timer setting mode without storing, press the
STOP
button.
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If DISC/USB source is selected and the audio cannot be played, TUNER is
activated automatically.