Krüger & Matz KM1598D, Owner'S Manual, Page: 34 / 120

34
Owner’s manual
EN
• Note: if the program list is empty, the device will automatically begin
programming stations.
2. Press the SCAN button on the remote control to activate automatic program mode.
• [SCANING] is displayed.
• All available stations are programmed.
• The first programmed radio station is broadcast automatically.
Store DAB radio stations manually
1. Tune to a radio station.
2. Press the PROGRAM button on the remote control to activate program mode.
• The preset number will blink.
3. Press the PRESET / buttons on the remote control to allocate a number
to this radio station.
Note: If you select more than 30, the preset number will be changed
to “1” automatically.
4. Press the PROGRAM button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with
a preset number.
Tuning to a DAB radio station
Repeatedly press the / buttons to change the frequency until you find the
station you want.
Tuning to Preset DAB Stations
Press the PRESET / buttons on the remote control until the desired preset
station is displayed.
The unit will tune to the selected station automatically.
DAB Information Display
You can view the DAB service information in the following modes. Depending
on the DAB radio station you are tuning to, some information modes may be
unavailable. Repeatedly press the INFO button on the remote control to view
the following information.
• Station Name
• Ensemble Name
A multiplex is a collection of radio stations that are bundled and transmitted
on one frequency. There are national and local multiplexes. Local ones
contain stations that are specific to that area.
Note: DAB – unlike normal radio, groups together several radio stations and
transmits them on one frequency.
• Clock
• Date
• DLS(Dynamic Label Segment)