Krüger & Matz KM1598D, Owner'S Manual, Page: 36 / 120

36
Owner’s manual
EN
Note: If you select more than 20, the preset number will be changed to “1”
automatically.
4. Press the PROGRAM button again to store the station.
5. Repeat above steps 1-4 for each station you want to store in memory with
a preset number.
Note: If the unit is unplugged or if a power failure occurs, the preset stations will
not be erased after being stored.
RDS RECEPTION
FM Display Modes
Every time you press the
INFO
button, the display will cycle through the following
display modes: Station Name, Programme Type, Time, Radio Text, Frequency
(looped). The information is displayed on the lower segment of the display.
CD OPERATION
CD Playing
1. Rotate the SOURCE knob on the unit or press the CD/USB button on the
remote control to select disc source.
2. Press the button to open the disc door and place the disc on the disc tray
(with the printed side up).
3. Press the button to close the disc door, the unit will read the disc and play
it automatically.
Note: If in stop mode, please press the button to start playing the disc.
4. Press the button to pause the playing, press again to continue play.
5. Press the button to stop the disc playing.
To Skip or Search and Play
• Press the / button once or more to skip backward/forward one or more
tracks on the disc.
• Press and hold the / buttons to search for the position that you intend
to start playing. Release to resume normal play.
Programme Play
You can programme up to 20 tracks to play in any desired order. The player
must be in STOP mode only with a CD inserted.
1. Insert a disc and press the STOP button when it starts playing.
2. Press the PROGRAM button, the LCD will display “ ” and “ ”.
3. Press the / buttons on the remote control to select the desired track number.
4. Press the PROGRAM button to confirm the track number to be stored.