Krüger & Matz KM0655, Owner'S Manual

Page: 13 / 60

13
Owner’s manual
EN
5. Micro USB
charging
port
Charging
6 Microphone Microphone for voice calls
7. ANC switch Slide to turn on/off
8. 3,5 mm port AUX input
9. ANC LED
The LED is green when the ANC function is enabled / The
Led is off when the function is disabled
Note: when reached maximum or minimum volume, the headphones will
issue a short sound.
PAIRING
Note:
• The headphones will automatically connect with the already paired
external device when both devices have Bluetooth function on and are
within 1 meter range.
• When in Bluetooth mode, when there is an incoming call the headphones
will switch to call automatically.
• Keep the devices in near distance (preferably within 1 meter).
Pairing with one device
1. To enter into the pairing mode, make sure the headphones are powered
off. press and hold the BT button for about 5 seconds until the Led
indicator will be blinking red and blue alternately.
Note: when in the paring mode, if pairing is not completed within 90
seconds, the headphone will enter standby mode, and you have to
restart for pairing. The headphone will automatically turn off within 15
minutes if no action (only if they have not been paired with any device).
2. Activate your phone Bluetooth function and search for external
devices. You’ll see a list of available devices; find and connect with the
headphones.
Note: pairing name for KM0655 is “KM F7A”, and KM0655L pairing
name is “KM F7A Lite”.
3. Once the headphones have successfully connected with the external
device, they will issue a “Connected” prompt, and the Led indicator will
blink blue.
Pairing with two devices
1. This headphones support 2 devices multi-connection. It can pair with two