Krüger & Matz KM0079, Owner'S Manual

Page: 23 / 68

Owner’s manual
23
EN
MOUNT AND BALANCE
Important! Smartphone or action camera must be mounted
on the gimbal before turning it on.
Smartphone
1. Prior to the mounting, make
sure to remove a protective
case from the smartphone.
2. Push and hold open the
smartphone holder.
3. Slide the smartphone in as
close as possible against the
tilt motor and push it back
towards the holder.
4. Clamp the smartphone
holder.
Action camera
1. Assemble the camera
mounting plate and
the bracket with the
included mounting
screws.
2. Insert the assembled
camera mount into the
smartphone holder.
3. Mount the action
camera in the camera
mount as close as possible against the tilt motor and
push it back (see the picture).
4. Tighten the screws to such an extent that the camera is
properly secured and does not slide out of the mount.