Krowne BC24 Installation & Operating Manual Download Page 23

23

Due to our commitment to continued product improvement, specifications are subject to change without notice.

No. REF MANUAL

Refrigeration  

Installation & Operating Manual

Krowne Metal Corporation  •  100 Haul Rd. Wayne, NJ 07470

krowne.com 

 

This Standard Warranty and Limitation of Liability (the “Warranty”) sets forth the warranty provided by Krowne Metal Corporation (hereinafter “Krowne”) with respect to the product 
purchased by Purchaser (the “Equipment). By accepting delivery of the Equipment, Purchaser agrees to be bound by and accept these terms and conditions. All defined terms 
within the Warranty shall have the same meaning and definition as provided elsewhere in the Warranty. Equipment covered by the Warranty shall only be warranted in connec-
tion with its original installation only.  KROWNE WILL ONLY BE OBLIGATED TO HONOR THE WARRANTY SET FORTH IN THESE TERMS AND CONDITIONS UPON RECEIPT OF FULL 
PAYMENT FOR THE EQUIPMENT.

1.  WARRANTY COVERAGE 

 

A.  

Subject to the conditions and exclusions set forth below, including, with respect to Diamond 

Series Plumbing, Purchaser’s completion and delivery to Krowne of a warranty registration card 
or online Warranty registration, Krowne warrants to Purchaser that (i) Krowne holds and will pass 
marketable title to the goods sold hereunder, and (ii) the goods sold hereunder will be free from 
defects in materials and workmanship (subject to tolerances and variances permitted by the trade 
hereunder) for the applicable Warranty Period, as listed above (the “Warranty Period”). 

B.  

Krowne’s obligation under this Warranty is limited to, at Krowne’s option, replacing or repair-

ing, any Equipment or part thereof that is found by Krowne not to conform to the Equipment’s 
specifications. Krowne shall have a reasonable period of time to make such replacements or 
repairs and all labor associated therewith shall be performed during Krowne’s regular working 
hours. 

C.  

Krowne shall pay transportation charges for the return of any defective portion of the Equip-

ment. If returned Equipment is repaired or replaced under the terms of this Warranty, Krowne will 
prepay transportation charges back to Purchaser; otherwise, Purchaser shall pay transportation 
charges to return the Equipment back to the Purchaser. All returns must be pre-approved by 
Krowne before shipment. Krowne shall not be obligated to pay freight for any unapproved return. 

D.  

Any replacement parts or Equipment will be new, comparable in function and performance 

to the original part of Equipment, and warranted for the remainder of the Warranty Period. 
Purchasing additional parts or Equipment from Krowne does not extend this Warranty Period. 

 

E.  

With regard to the Equipment, a defect shall refer to a variance from the design specifica-

tions that prohibit the Equipment from operating for its intended use. The Warranty provided by 
Krowne does not impose any duty or liability upon Krowne for degradation that occurs in the 
normal course over time, or due to improper installation of the Equipment by Purchaser or their 
representative. 
 
THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE EQUIPMENT AND 
REPLACES ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, 
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE. SPECIFICALLY, EXCEPT AS PROVIDED HEREIN, 
KROWNE UNDERTAKES NO RESPONSIBILITY FOR THE QUALITY OF THE EQUIPMENT OR THAT 
THE EQUIPMENT WILL BE FIT FOR ANY PARTICULAR PURPOSE FOR WHICH PURCHASER MAY 
BE BUYING THE EQUIPMENT. ANY IMPLIED WARRANTY IS LIMITED IN DURATION TO THE WAR-
RANTY PERIOD. NO ORAL OR WRITTEN INFORMATION, OR ADVICE GIVEN BY THE COMPANY, ITS 
AGENTS OR EMPLOYEES, SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE 
OF THIS LIMITED WARRANTY.

2.  EXCLUSION FROM WARRANTY COVERAGE 

 

The Warranty provided by Krowne does not impose any duty or liability upon Krowne for:

 

A. 

Any damage occurring, at any time, during shipping of Equipment unless otherwise provided 

for in the Agreement. When returning Equipment to Krowne for repair or replacement, Purchaser 
assumes all risk of loss or damage, and agrees to use any shipping containers that might be 
provided by Krowne and to ship the Equipment in the manner prescribed by Krowne; 

B. 

Damage caused by the failure to provide a continuously suitable environment, but not limited 

to: (i) neglect or misuse, (ii) a failure or sudden surge of electrical power, (iii) improper air condi-
tioning or humidity control, or (iv) any other cause other than ordinary use; 

 

C. 

Damage caused by the unauthorized installation, adjustment, repair or service of the Equip-

ment by anyone other than Krowne or Krowne’s expressly authorized designee; 

 

D. 

Damage caused by fire, flood, earthquake, water, severe wind, lightning or other natural 

disaster, strike, inability to obtain materials or utilities, war, terrorism, civil disturbance or any 
other cause beyond Krowne’s reasonable control; 

E. 

Failure to adjust, repair or replace any item of Equipment if it would be impractical for Krowne 

personnel to do so because of connection of the Equipment by mechanical or electrical means to 
another device not supplied by Krowne, or the existence of general environmental conditions at 
the site that pose a danger to Krowne personnel; 

F.  

Any statements made about the product by salesmen, dealers, distributors or agents, unless 

such statements are in a written document signed by an officer of Krowne. Such statements 
as are not included in a signed writing do not constitute warranties, shall not be relied upon by 
Purchaser and are not part of the contract of sale;   

G.  

Any damage arising from the use of Krowne products in any application other than the com-

mercial and industrial applications for which they are intended, unless, upon request, such use is 
specifically approved in writing by Krowne; or 

 

H. 

Any performance of preventive maintenance

3.  PURCHASER’S INSPECTION UPON RECEIPT OF  

 

EQUIPMENT 

 

All Equipment shall be carefully inspected by Purchaser upon receipt, be installed by 
persons who are trained and certified professionals with respect to such installations, and 
be installed, used, repaired and maintained by Purchaser in accordance with all applicable 
local laws, codes and regulations.

4.  LIFETIME WARRANTY PRODUCTS 

 

The Lifetime Warranty for the Krowne Metal Corporation Gas Hose (“Gas Hose”) is valid 
solely for the lifetime and duration of the Equipment to which the Gas Hose is connected 
for operation (the “Lifetime Warranty”). For the avoidance  of doubt, the Lifetime Warranty 
shall be deemed expired on the same Warranty Period expiration date applicable to the 
Equipment to which the Gas Hose is connected.

5.  LIMITATION OF LIABILITY 

 

In no event shall Krowne (including its subsidiaries, affiliates, officers, directors, employees, 
or agents) be liable for any special, consequential, incidental or exemplary damages 
arising out of or in any way connected with the Equipment or otherwise, including, without 
limitation, to damages for lost profits,  cost of substitute or replacement Equipment, down 
time, lost data, injury to property or any damages or sums paid by Purchaser to third 
parties, even if Krowne has been advised of the possibility of such damages. The foregoing 
limitation of liability shall apply whether any claim is based upon principles of contract, tort 
or statutory duty, principles of indemnity or contribution, or otherwise. 
 
In no event shall Krowne be liable to Purchaser or any other party for loss, damage, or 
injury of any kind or nature arising out of or in connection with this Warranty in excess of 
the purchase price of the Equipment actually delivered to and paid for by the Purchaser. 
The Purchaser’s remedy in any dispute under this Warranty shall be ultimately limited to 
the Purchase Price of the Equipment to the extent the Purchase Price has been paid.

6.  ASSIGNMENT OF RIGHTS 

 

The Warranty contained herein extends only to the original Purchaser of the Equipment and 
no attempt to extend the Warranty to any subsequent user or transferee of the Equipment 
shall be valid or enforceable without the express written consent of Krowne. Any attempt 
by Purchaser to assign this Warranty shall render the Warranty, but not any disclaimers or 
limitations, void, and the goods shall be sold AS IS.

7.  COMPONENT PASS THROUGH WARRANTY 

 

Except as provided herein, although Krowne does not warrant components, it will pass 
through any warranties received by third-party component suppliers, to the extent permit-
ted by the terms and conditions of such warranties.

8.  NOTICE AND TIME OF CLAIMS 

 

Purchaser shall make any claim for loss or damage to Equipment sustained during ship-
ment within five (5) days of receipt of such Equipment.

9.  DISPUTE RESOLUTION 

 

Any dispute between the parties will be resolved exclusively and finally by arbitration and 
conducted under the assigned arbitrator rules, except as otherwise provided below. The 
arbitration will be conducted before a single arbitrator. The arbitration shall be held in Essex 
County, New Jersey. Any decision rendered in such arbitration proceedings will be final 
and binding on each of the parties, and judgment may be entered thereon in any court of 
competent jurisdiction. This arbitration agreement is made pursuant to a transaction involv-
ing interstate commerce, and shall be governed by the Federal Arbitration Act.

10. 

 

 

Both parties consent to the application of the laws of the State of New Jersey to govern, 
interpret, and enforce all of Purchaser and Krowne’s rights, duties, and obligations arising 
from, or relating in any manner to, the subject matter of this Warranty, without regard to 
conflict of law principles. In no event shall the rights and obligations of the parties under 
this warranty shall not be governed by the provisions of the United Nations Convention on 
Contracts for the International Sales of Goods of 1980.

Terms

GOVERNING LAW 

Summary of Contents for BC24

























Reviews: