
21
Due to our commitment to continued product improvement, specifications are subject to change without notice.
No. REF MANUAL
Refrigeration
Installation & Operating Manual
Krowne Metal Corporation • 100 Haul Rd. Wayne, NJ 07470
krowne.com
1.
Power down the unit. After the unit is off, remove the (4)
1/4” hex screws to remove the existing light.
2.
Remove light and cut off both wire caps
3.
Reconnect wires with wires from the new light. Red to
Red, Black to Black. Reattach the electrical connector to
the new wires.
4.
Put all the screws back. Make sure wires are not pinched
under new brackets.
1.
Remove shelving.
Locate the pilaster clip
and apply pressure to
the bottom of the clip
and slide out to remove.
2.
Align clips to desired
height by using the
numbered slots on the
pilaster strips. Adjust all
clips to the same number
on the pilaster strips.
4.
Repeat until all other
clips are secured in their
slots. Place your shelves
onto clips.
3.
Insert the top part of the
clip into the slot and apply
pressure to the bottom
half of the clip until the
clip snaps into place.
Tools Required:
1/4” Hex Screwdriver
Tools Required:
None
Changing LED Lights
Adjusting Shelving