![background image](http://html.mh-extra.com/html/krown/starplus-standard/starplus-standard_instruction-manual_2005009009.webp)
6
7
Setup your StarPlus Standard
Setting up your StarPlus Standard includes installing backup batteries and
mounting the phone. Replace with new batteries after each blackout. Your StarPlus
Standard will still operate normally in power outages before it falls back to a
regular telephone. For your safety, the StarPlus Standard can be used to call out
with no backup batteries installed.
1. Installing backup battery
StarPlus Standard uses 4 AA alkaline backup batteries. Unplug the power adapter
and telephone line before installing back-up batteries.
1. Insert a coin to the cover latch. Press
toward the topside to release the battery
cover on the bottom of the unit.
2. Remove the battery compartment cover.
3. Place four AA alkaline batteries into
the compartment following the
directional marks.
4. Replace the cover and press down to
close the cover.
2. Desktop mounting
1. Install telephone cord to the wall outlet
and to the telephone as shown in
Figure 4.4
2. Install the handset coiled cord as shown
in Figure 4.4
3. Set the dial mode selector to P (pulse) if
you have pulse dialing (rotary). If you
have tone dialing, do not change this
switch. Manufacturer setting default is
tone dial mode.
4. Plug the AC adapter cord into the power
jack located on the topside of the
telephone. Plug the AC Adapter into a
standard 120VAC wall outlet.
5. Pick up the handset or press speaker
button and listen for a dial tone. Your
StarpPlus Standard is ready to use.
CHAPTER 4
CH. 4 (CONT)
FIGURE 4.1
FIGURE 4.2
FIGURE 4.3
FIGURE 4.4
FIGURE 4.7
FIGURE 4.8
FIGURE 4.9
phone jack phone signaler
3. Wall mounting
a. Install wall mounting plate as shown in Figure 4.3
b. Take the handset hook out and flip it to reverse position as shown in
Figure 4.7. It will hold the handset when the phone is in a vertical position.
c. Use the provided 6 inch modular cord to mount the phone as shown
Figure 4.8.
d. Repeat step 3 through 6 of Desktop mounting section to complete
the setup.
4. Setting up an external signaler
Connect the external ringer device direct to the second phone jack located on the
top left side of the unit as shown in Figure 4.9.
5. Connecting to an assistive listening device
Your StarPlus Standard provides an audio jack to connect direct to an assistive audio
listening device. It is not designed for a hands-free headset or a phone headset.
Basic Operations
While the phone is ringing, the RING indicator and the super bright ring flasher
will flash.
Making and Receiving Calls on your StarPlus Standard:
HANDSET
Making a call
1. Pick up the handset from the base.
2. Dial desired number.
3. Hang up upon completion of the call.
1. Pick up the Handset from the base.
2. Speak.
3. Hang up upon completion of
the call.
1. Press the button.
2. Dial desired number.
3. To hang up, press the button.
1. Press the button.
2. Speak
3. To hang up, press the button.
Receiving a call
SPEAKERPHONE
Summary of Contents for StarPlus Standard
Page 1: ...STANDARD INSTRUCTION MANUAL 1st Edition TM ...
Page 15: ...m ...