II. Operation (CONT)
Charge your mobile phone every night to a full charge to make sure it ready
to use next day. Use only the supplied cable to connect the PVCO-C to the
mobile phone.
NOTE: When purchase the cell phone and sevice for your PVCO-C. Make sure
your get a TTY compatible unit or look for a TTY-cellular telepphone symbol.
NOTE: Look for the logo on the cell phone box or brochure for a TTY/TDD
Compatible. Always ask for a cell phone with vibrating mode in order to save
you to buy a vibrating battery to use.
10. Answering an incoming mobile call
Make sure to turn on the ringer of your mobile phone to be “ON” and in
vibrating mode. If your battery does not support this mode you may need to
order a vibrating battery from your mobile phone provider.
Connect the communication cable firmly on both mobile phone and PVCO-C.
Answer the call on the cell phone by pressing talk or send button. (Refer to
owner manual for more detail.) Say your greeting message and end by a “GA”
or “Go ahead”. The conversation has begun. When you are ready to hang up,
turn off your PVCO-C and hang up the cell phone.
NOTE: your cordless phone does not support vibrating ringer mode. Buy a tac-
tile telephone signaler pager and install the tramsmitter into the telephone out-
let. Wear the receiver on your belt.
OR
8
