25
4. Pressing
INT
will toggle the between internal and external calls.
The message “INTERCOM HOLD” will be
displayed to indicate that the status of
the internal call.
TRANSFERRING CALLS
An incoming call on one handset can be transferred to another handset:
1. On the first handset, press INT (the external call will be put on hold).
2. Select a handset from the menu and press
Talk
, or press the handset number
from the keypad.
3. Once the second handset answers the call, press
Talk
on the first handset to
hang up the call. The second handset will be on line with the external call.
NOTE:
When transferring a call, the first handset must wait for the other to
answer before pressing Talk to hang up the call.
1.Press
CONF
when you are off hook and other handset is on hold to place a
conference call between the outside call and the two handsets. The handset
displays will shown:
2.To stop a conference call on one of the handsets, press
Talk
. The connection
will continue between the remaining parties.
If one handset is off hook and other handset try to access the line, the message
“LINE IN USE” will be shown on other handset display.
The paging is used to locate handsets. Press
Page
from the base unit. The base
will send a signal to the handset and activate the beeps on the handset. Paging
stops automatically after 120 seconds or if any key is pressed on the handset or
base unit.
HOLDING A CONFERENCE CALL
ONE-WAY BASE PAGING
