Kronotech BLUEBOX GEN2 M30 UHF, Manual, Page: 18 / 51

B5U027115E GEN2 M30 UHF Serial-J1939 Manual – Rev. 1.15 Page 18 of 51
Parameter Description
• Bit 6: Not used;
• Bit 5: Not used;
• Bit 4: CAN bus interface;
• Bit 3: Not used;
• Bit 2: Not used;
• Bit 1: Not used;
• Bit 0: Serial interface.
Format
The ‘spontaneous’ message format setup:
 0x00: Message is sent using BlueBox protocol rules;
 0x01: Message is sent like in option 0x00, without any control character just
ASCII string;
 0x02: Message is sent like in option 0x01 but at the end CR will be appended;
 0x03: Message is sent like in option 0x01 but at the end CR+LF will be
appended.
 0x04: Message is sent, without any control character, in ASCII form. Non
printable chars (0x20..0x7E) are replaced with ‘.’ (0x2E).
 0x05: Message is sent like in option 0x04 but at the end CR will be appended.
 0x06: Message is sent like in option 0x04 but at the end CR+LF will be
appended.
3.2.2 RF and EPC C1G2 (Class-1 Generation-2)
This section provides details on the configurable RF and EPC C1G2 (Class-1
Generation-2) parameters of the BLUEBOX
Parameter Description Range Default
RF
Geographical
Region
RF geographical region.
Note that ETSI, FCC and Brazil readers
cannot be altered and only operate per the
regulatory laws in USA/Canada, the European
Union and Brazil.
EU1: ETSI
FCC: FCC
BRA: Brazil
EU1: ETSI
FCC: FCC
BRA: Brazil
RF Trasmit
Power
RF conducted transmit power in dBm.
Refer to country specific regulations for
limitations. You, the user, are responsible to
ensure operation with the correct RF settings and
are solely responsible for any fines and other
damages due to incorrect or non-compliant
country/region settings.
0 … 24 dBm 20 dBm
RF Receive
Sensitivity
RF receive sensitivity in dBm. -51 … -87 dBm -76 dBm
RF Channel
RF channel.
Note that 0 value stands for default settings
of the selected region.
EU1: 0 … 10
FCC: 0 … 50
BRA: 0 … 50
0