Kronos InTouch DX, User Manual

Page: 118 / 132

Chapter 4 Maintenance Mode Functions
118
– Strong
– Weak
7. To require users to enter this password when they swipe a Maintenance badge,
enable Require Password with Badge .
8. Tap Save Settings .
Change Database Password
Use the Change Database Password function to change the password for a
database.
1. Tap
Edit Advanced Settings .
2. Tap Change Database Password .
3. Enter the new password, which must be eight characters in length, and contain
at least one of each of the following: uppercase letter, lowercase letter,
number, and special character. Tap
Enter .
4. Re-enter the new password and tap Enter .
5. Tap Save Settings .
Factory Defaults
Use Factory Default to restore the device settings to the factory default settings.
Caution: Use the Factory Default settings only if the timeclock is not operating
properly. You lose all previous settings and data when you perform this function.
1. Tap Edit Advanced Settings .
2. Tap Factory Defaults .
3. To confirm your selection, tap Restore . The timeclock reboots.