manualshive.com logo in svg

Kronos InTouch DX, User Manual

Share
Download
Kronos InTouch DX User Manual Download Page 109

Edit Settings

109

Wi-Fi

Supported Wi-Fi networks

InTouch DX supports connections to wireless local area networks (WLAN) that 
meet the following requirements:
•

802.11 b, g, or n 2.4 GHz compatible wireless local area networks.

•

WPA and WPA2 Personal and Enterprise security protocols.

InTouch DX does 

not

 support connections to networks with the following 

characteristics:
•

CDMA/3g/4g or any other type of cellular wireless network.

•

Wi-Fi networks that require a secondary password or confirmation via a web 
browser.

Configure settings

The timeclock supports only DHCP connections for Wi-Fi.

Note

: The timeclock can take up to several minutes to make the wireless 

connection. A confirmation page indicates whether the connection was successful.

After you complete the Wi-Fi settings, ensure that the IPV4 settings are 
configured correctly for the Wi-Fi network (see 

“IPV4 Configuration” 

on page 

107).
1. Tap 

Edit Settings

.

2. Tap 

Connect to Network

.

3. Tap 

Wi-Fi

.

4. Slide the 

OFF

 button to 

ON

.

5. Tap the appropriate network from the list.
6. Tap 

Connect to network

.

7. Scroll to and tap the 

Identity

 field.

8. Use the keypad to enter the user name (for example, 

[email protected]) and tap 

Next

.

Summary of Contents for InTouch DX





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands