Settings
43
Pos: 68.1 /Überschriften/Überschriften 1/A-E/Einstellungen @ 0\mod_1199868783862_78.docx @ 36141 @ 1 @ 1
11 Settings
Pos: 68.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Mähwerke/Warnung - Einstellarbeiten angebaute Maschinen @ 254\mod_1397487875458_78.docx @ 1953794 @ @ 1
DANGER! - Unexpected movement of the machine
Effect: Danger to life or serious injuries.
•
Setting tasks must only be performed when the drive is switched off and the engine is at a
standstill!
•
Switch off engine.
•
Remove the ignition key and carry it with you.
•
Secure the tractor against rolling away.
Pos: 68.3 /Überschriften/Überschriften 2/A-E/Einstellen der Schnitthöhe @ 0\mod_1196660879619_78.docx @ 9191 @ 2 @ 1
11.1
Adjusting the cutting height
Pos: 68.4 /BA/Einstellungen/Mähwerke/Schnitthöhe/Schnitthöhe Bild EC 280/320 CV-Q -1 @ 59\mod_1297425448144_78.docx @ 557836 @ @ 1
EC-367-0
1
Fig. 22
Pos: 68.5 /BA/Einstellungen/Mähwerke/Schnitthöhe/Schnitthöhe größer_geringer EC280/320 @ 9\mod_1220960304209_78.docx @ 130271 @ @ 1
The cutting height is adjusted via the top link (1).
To do this:
•
Swivel the parking support(s) down
•
Lower the machine into working position and set it down on the parking support(s).
•
Rotate the top suspension arm (1).
•
Fold in the parking support(s).
Top suspension arm longer = bigger cutting height
Top suspension arm shorter = smaller cutting height
Pos: 68.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for EasyCut R 360
Page 85: ......
