Krone BOX LINER TU 70 Operating Instructions Manual Download | Manualshive

Page: 42 / 92

background image

SUPERSTRUCTURE OPERATION

42

Operating instructions • Box Liner • 515108039-02 • 11/2018

6

Superstructure opera-
tion

6.1

Adjusting the front exten-
sion

The trailer can be extended to accommod-
ate different load combinations and con-
tainers. The front extension is equipped
with a mechanical locking device and can
be locked in two positions.

It needs to be operated without containers
loaded.

6.1.1

Pulling out the front extension

► Park the trailer on level ground.

► Apply the parking brake on the trailer

(see "5.6.2 Parking brake", pg. 31)

► Secure the trailer against rolling away

(see "5.1 Using wheel chocks", pg. 20)

1

2

3

Fig. 6-1:

Operating the front extension

1

Locking bolt for front extension

2

Front extension

3

Control lever for front extension

► Unlock and fold out the control lever

for the front extension.

► Push up the control lever for the front

extension.

ð

The lock is opened.

► Pull the front extension out to the stop.

► Push down the control lever for the

front extension.

ð

The lock is closed.

► Fold in and lock the control lever for

the front extension.

► Remove the securing device that pre-

vents rolling away

(see "5.1 Using wheel

chocks", pg. 20)

► Disengage the parking brake on the

(see "5.6.2 Parking brake", pg. 31)

ü

The front extension has been pulled
out.

6.1.2

Pushing in the front extension

► Park the trailer on level ground.

► Apply the parking brake on the trailer

(see "5.6.2 Parking brake", pg. 31)

.

► Secure the trailer against rolling away

(see "5.1 Using wheel chocks", pg. 20)

.

► Unlock and fold out the control lever

for the front extension.

► Push up the control lever for the front

extension.

ð

The lock is opened.

► Push the front extension in all the way.

► Push down the control lever for the

front extension.

ð

The lock is closed.

► Fold in and lock the control lever for

the front extension.

► Remove the securing device that pre-

vents rolling away

(see "5.1 Using wheel

chocks", pg. 20)

► Disengage the parking brake on the

(see "5.6.2 Parking brake", pg. 31)

ü

The front extension has been pushed
in.

6.2

Adjusting the middle exten-
sion

The trailer can be extended to accommod-
ate different load combinations and con-
tainers. The middle extension is equipped
with a mechanical locking device and can
be locked in various positions.

It needs to be operated without containers
loaded.

«
...
40
41
42
43
44
...
»

Summary of Contents for BOX LINER TU 70





























































































Reviews:

No comments

Related manuals for BOX LINER TU 70

Brand: Yerf-Dog Pages: 59

Brand: E-TON Pages: 36

Brand: Lil Pick Up Pages: 29

Brand: Ski-Doo Pages: 52

Brand: Aosom Pages: 5

Brand: Yamaha Pages: 88

Brand: Yamaha Pages: 83

PRO HAULER YXP1000

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 94

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 194

Brand: Yamaha Pages: 287

Brand: Wittke Pages: 104

Brand: Jerr-Dan Pages: 104

Pendpac WITTKE RETRO FL

Brand: Labrie Pages: 98

Brand: KAYO MOTO Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands