SAFETY
14
Operating instructions • Box Liner • 515108039-02 • 11/2018
► Secure the load in accordance with the
applicable regulations.
► Ensure that the load securing aids are
not damaged and are functional.
Load securing
Unsecured or incorrectly secured loads
can result in poor road handling or even
accidents. Lost loads can cause injury to
other road users.
► Secure the load according to the re-
quirements of the relevant regulations
for load securing.
► Observe the instructions on the load
securing certificates.
Dangers caused by improper mainten-
ance
Improperly performed maintenance work
(care and cleaning, maintenance, repairs)
impairs the safety.
► Perform regular inspections for de-
fects.
► Perform care and cleaning work prop-
erly.
► Only have repair work carried out by
authorised specialist workshops or by
KRONE.
Operating materials
Operating materials (e.g. lubricants,
coolants, fuels) are hazardous to health.
Immediately seek medical attention upon
ingesting operating materials. If possible,
avoid breathing vapours. Do not allow op-
erating materials to come into contact with
the skin, eyes, or clothing. Clean affected
skin areas with water and soap. If it enters
the eyes, immediately and thoroughly
clean them with abundant clear water.
Change soiled clothing as soon as pos-
sible. Keep operating materials away from
children.
2.11
Notes about legal regula-
tions
The trailer is built according to the regula-
tions that were applicable at the time of de-
livery in the intended country of registra-
tion.
► Observe compliance with the nation-
ally prescribed monitoring inspections
and time intervals.
► Observe compliance with the nation-
ally prescribed weights, axle loads,
and drawbar loads. They can be lower
than the technically possible values.
► Observe compliance with the nation-
ally prescribed maximum vehicle
height for the tractor-trailer combina-
tion.
Changes to the vehicle against the data
provided in the registration documents res-
ult in the operating permit becoming in-
valid. This includes, in particular, driving on
public roads without a power supply for the
brake electronics via the ISO-7638 plug
connection.
► Do not make any unauthorised
changes or manipulations.
► Have permitted changes entered into
the vehicle documentation by a certi-
fied test centre.
► Only use proper and approved tyres.
► Only used approved and suitable
.
► Observe the normal use position of a
moving component for normal vehicle
use and when the vehicle is parked.
► Only drive with the EBS plug connec-
ted.
