manualshive.com logo in svg

Krone AM 203 CV, Operating Instructions Manual

Share
Download
Krone AM 203 CV Operating Instructions Manual Download Page 33

31

1

3

2

AM-0-044

AM-1-076

K

R

O

NE

Protective Cloth Covers

The protective cloth covers (1) must be checked
regularly. Worn or damaged coth covers must be
replaced.
Protective features on the cutter bar, e.g. coth covers
and cover plates, protect from thrown up stones etc.
and from access to the dangerous part of the machine.
They must therefore be put in protective position before
work commences.

Safety first! Take no risks. Do not
experiment with imitation parts. Use only
original KRONE parts!

Conditioner

The conditioner processes the cut crop so that it can
dry faster. To ensure the best possible effec-
tiveness, the conditioner shaft (2) must be inspected for
damaged tines before each use. Bent tines must be
straightened. Broken tines must be replaced. The
degree of processing of the crop is adjusted by means
of the distance setting of the cover plate (3) of the
conditioner (see chapter “Adjustments”).

The conditioner shaft rotates at speeds
of up to approx. 1000 rpm. Broken tines
cause dangerous irregularities in the
rotation. Therefore, broken tines must be
replaced immediately.

5. Conditioner and Protective Cloth Covers

Summary of Contents for AM 203 CV

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands