Krone AM 203 CV, Operating Instructions Manual

Page: 12 / 56

10
2. Preparing for Operation
2.1 Attaching the Disc Mower to the Tractor
5. The protective cloth covers must be regularly
checked. Covers that are worn or damaged must
be replaced.
6. The protective features on the mower, e.g. cloth
covers and guard plates, are designed as
protection from stones etc. that are thrown out,
and also to prevent access to dangerous parts of
the machine. Therefore it is essential that they
are placed in position before work commences.
7. When the mower is being lowered from transport
position to working position or back to
transport position, nobody must be allowed to
go between the tractor and the mower.
8. Special care is required when fitting implements
to the tractor or removing them. It is essential
that the accident prevention regulations are
observed.
1. The mower is designed solely for nor
mal agricultural use. (Operation in
accordance with specifications)
2. While working with the mower, all
personnel must keep a sufficient
safety distance from the cutting
elements.
3. The support skids must be on the
ground before the machine is
switched on and during operation.
4. Even when the mower is used in
accordance with specifications,
stones etc. may be thrown out.
Therefore, nobody must be allowed to
enter the danger area. Special care
must be taken when working near
roads and buildings.
Adapting the hitch points
The hitch points are adjusted as standard for cat. II.
If the mower is to be moved to the side in the case of
cat. II, hitch point (1) must be moved to the outside.
Tighten the bolts (2) firmly after modification.
AM-1-001
Kat. II
AM-1-001
Kat. II
3
2
1
2