Krone ADW 27 eLB9 Operating Instructions Manual Download Page 41

Page: 41 / 92

RUNNING GEAR OPERATION

Operating instructions • Box Carrier • 505410619-02 • 05/2021

Fig. 5-24:

Activating the emergency release
screw

Emergency release screw

Flat washer

Retainer nut

► Insert the emergency release screw.

► Turn the emergency release screw

clockwise (90°) until it engages.

► Screw the retainer nut and flat washer

onto the emergency release screw.

► Tighten the retainer nut with the suit-

able spanner until the stop.

The spring storage is mechanically
tensioned and the brake cylinder has
no more braking effect.

► Activate the emergency release device

on all the spring storage devices.

The emergency release device is ac-
tivated and the service and parking
brakes are without function.

The trailer is not braked.

Deactivating the emergency release
device for the parking brake

Fig. 5-25:

Deactivating the emergency re-
lease screw

Emergency release screw

Flat washer

Retainer nut

► Unscrew the retainer nut and flat

washer from the emergency release
screw using a suitable spanner.

► Turn the emergency release screw key

counter-clockwise (90°) and disengage
it.

► Remove the emergency release

screw.

► Insert the emergency release screw in

its holder.

► Screw the retainer nut and flat washer

onto the emergency release screw and
tighten up to the stop with a suitable
spanner.

► Close the cap.

The spring storage is mechanically re-
leased and the brake is functional.

► Deactivate the emergency release

device on all the spring storage
devices.

The emergency release device is de-
activated and the service and parking
brakes are functional.

Summary of Contents for ADW 27 eLB9





























































































Search results

Summary of Contents for ADW 27 eLB9

Reviews:

Related manuals for ADW 27 eLB9

Brands by name

Popular brands

Krone ADW 27 eLB9, Operating Instructions Manual

Search results

Summary of Contents for ADW 27 eLB9

Reviews:

Related manuals for ADW 27 eLB9

Brands by name

Popular brands