Krone 5XL-GD, Operating Instructions Manual

Page: 9 / 126

I - 1
General information
1 General information
1.1 Use
The short-cut feeder wagon is a feeder wagon with
metering rollers. It is designed for the collection,
transport and putting down of agricultural stalk material.
The variable cutter theoretically provides for cutting
lengths up to 40mm.
1.2 Information on the product
1.2.1 General information
These operating instruction apply to short-cut feeder
wagon Models 5XL-R/GD and 6XL-R/GD.
1.2.2 Manufacturer’s address
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Strasse 10
D-48480 Spelle (Germany)
Telephone: 0 59 77/935-0
Facsimile 0 59 77/935-339
E-mail: info.ldm@krone.de
1.2.3 Certification
Declaration of conformance according to EC-Directive
See inside title page
1.2.4 Identification label
Model
Year of
manufacture
Vehicle-
ident-no.
The whole identification label has
documentation value and must not be
altered or made unrecognisable
1.2.5 Information for enquiries and orders
When ordering spare parts, the model number, vehicle
identification number and the year of manufacture of
the corresponding machine must be quoted.
Spare parts form other manufacturers
may only be used after consultation
with the manufacturer of this
equipment. In the interest of safety,
only genuine parts and accessories
authorised by the manufacturer should
be used. No liability can be accepted
for consequences resulting from the
use of other parts.
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Str. 10 D-48480 Spelle
Made in
Germany
1
6XL00001