KRONAsteel KRMFR101, Manual

Page: 40 / 48

REFRIGERATORS
Installation and operation instructions
INSTALLATION AND OPERATION OF THE REFRIGERATOR
Before using the refrigerator, pay attention
to the following points:
• The operating voltage of the refrigerator is
220-240 V AC at 50 Hz.
• Ensure free access to the electrical outlet
after installing the appliance.
• When you turn on the refrigerator for the
first time, a peculiar smell may appear.
Once the cooling process starts, the smell
will disappear.
• Before connecting the power cable, make
sure that the voltage indicated on the
rating plate matches the voltage of your
home's electrical network.
• Insert the plug into a properly grounded
outlet. If the electrical outlet does not
have a ground terminal, or the plug does
not fit into the outlet, we recommend that
you contact a qualified electrician for
assistance.
• The device must be connected to a mains
supply with a properly installed fused
socket. The power supply (alternating
current) and the voltage at the operating
point must be indicated on the nameplate
of the device (located on the left inside
the refrigerator).
• We are not responsible for any damage
caused by using the refrigerator without
grounding.
• Place the refrigerator in a place that
prevents
direct sunlight.
• The refrigerator should under no
circumstances be used outdoors or left in
the rain.
• The refrigerator must be at least 50 cm
away from stoves, ovens and heaters and
at least 5 cm away from electric ovens.
• When the refrigerator is next to the deep
freezer, the distance between them
should be at least 2 cm to prevent
condensation from escaping on the
outside.
• Do not place heavy objects on the
refrigerator.
• Thoroughly clean the device before use,
especially inside (see "Cleaning and
maintenance" section).
• For installation in a kitchen, see the
Installation section.
The product is intended for use only
when built in a kitchen that meets all
requirements.
• Before using the refrigerator, wipe all parts
6