KRONAsteel INGA 600, Application Sheet

Page: 9 / 52

9
EN Application sheet EN Application sheet
KITCHEN HOODS
DE Gebrauchs- und Wartungsanweisung
This product is marked in accordance with the European
Directive 2002/96/EU on waste electrical and electronic
equipment (WEEE).
By ensuring correct disposal of this product, you will help
to prevent potential negative consequences for the envi-
ronment and human health.
The symbol on the product or in the supporting doc-
umentation specifies that you cannot treat this product
as common household waste during disposal. Instead, it
should be taken to the relevant waste electric and elec-
tronic equipment station for further disposal.
Scrapping should comply with the local waste disposal
rules.
Contact the local authorities, waste disposal service or
the shop where you bought the product for more detailed
information about the rules of such products treatment,
disposal and processing.
For the User
ATTENTION! Install and operate the device in ac-
cordance with the Instructions.
Important notes
This kitchen hood is to be used by households
only. Use for other conditions is inadmissible,
and warranty does not cover such cases.
Before installation and film removal, make sure
that the kitchen hood functions in all working
modes (See the Kitchen Hood Installation sec-
tion).
All works related to installation, connection and
repairs should only be performed by qualified
technicians specializing in the product.
The manufacturer is not liable for any failures
and breakdowns that are related to wrong instal-
SCOPE OF DELIVERY*
The scope of delivery includes as follows:
1. Kitchen hood body – 1 pc.
2. Decorative air duct case – 2 pcs.
3. Operating instructions – 1 pc.
4. Set of fasteners for hood wall mounting – 1 pc.
5. Flange with non-return valve (unless the non-return valve is installed) – 1 pc.
6. Adapter flange 150\120 mm for hoods with air duct diameter 150 mm – 1 pc.
* the scope of delivery is subject to change without prior notice.
TECHNICAL CHARACTERISTICS
Model
INGA/IRIDA
push button/sensor
IRMA sensor
Dimensions, mm:
Hood width 600/900 600
Hood length (depth) 390/393 390
Hood height (min. - max.) 750–1080
Diameter of the outlet, mm 120 (150)
Network voltage / network frequency 220-240 V~ / 50 Hz
Power consumption, W:
Engine 140
Lamps, type, cap 2x50 halogen or 2x3 LED, GU 10
Number of ventilation rates 3
Control push buttons / sensor sensor
Timer no/yes yes
(Net) weight, kg 9,3/13 9,3