Kronan SYSKON, Manual

Page: 52 / 60

50
Removing the fabric
Washing instructions
Wash the fabric at 30 degrees and do not use a rinsing agent. Follow the washing in-
structions on the label attached to the fabric. Close all zip fasteners before washing. Al-
low the fabric to drip dry, and refit it to the pram when slightly damp, in order to obtain
the best fit. Allow the fabric to dry thoroughly before placing the child in the pram.
Look after your Kronan pram: if you look after it carefully it will last longer and more people
will be able to benefit from it. Follow the recommendations below concerning cleaning, care
and maintenance. Keep the pram under cover or indoors when it is not in use.
Seat unit
Do as stated below:
Remove the crossbar from the seat unit.
Turn the seat unit upside down and undo all the buckles, hook-and-loop tape and
snap fasteners.
Open the zip at the back to remove the hood from the seat unit.
Undo the five-point harness and remove it from the seat unit.
Remove the fabric from the seat unit.
Pull out the bottom plate by opening the hook-and-loop tape on the lower side of the fabric.
Pull the backrest out by opening the hook-and-loop tape and unzipping along both
sides of the fabric, at the head end.
Remove the hood frame from the hood attachment by undoing the screw at the at
tachment using a cross-head screwdriver.
Remove the frame from its attachment by pulling it gently out.
Remove the hood fabric from the hood frame.
1
2
3
4
5
6
7
8
9