Kronan SYSKON, Manual

Page: 47 / 60

45
Mounting the hood on the seat unit
Do as stated below:
Open up the hood.
Attach the fittings in the seat unit as shown in Figure A.
If the fittings are in different positions during the mounting, it is possible to attach one of
them first and then adjust the placing until it has the same position as the second fitting.
Then attach the second fitting.
Back support
The seat unit has a back support that can be set at stepless increments, for the comfort of the
child. Do as stated below:
Lower the back support by snapping the press-button fitting together and pulling it
downwards. Figure A.
Raise the back support by pulling the nylon tape upwards. Figure B.
1
1
2
2
3
A