Introduction :
Thank you for a purchasing our professional product
and we believe it will operate to your satisfaction.
General instructions and precautions
Safety instructions:
Warning! Respect the basic safety instructions
given by the manufacturer. Take care of your
personal safety. Cooling equipment is designed for
flow type cooling of beverages. The supplier shall
not be liable for damages caused by improper use.
DO NOT USE THE MACHINE FOR ANY OTHER
PURPOSES THEN WHAT IT IS INTENDED FOR!
General safety rules
The manufacturer is not liable for damages caused by
actions that do not follow following these instructions.
CAUTION:
Before connecting the main electrical supply,
check if the voltage and frequency corresponds to
the specifications shown on the machine.
CAUTION:
Make sure the socket to connect the cooler is equipped
with sufficient circuit breaker (16A depending on the type)
according to CSN 33 1500 norm.
CAUTION:
Before any cleaning or maintenance, always
disconnect the machine from the electricity supply:
Put the main switch (thermostat) into the position
"O" and pull out the plug.
CAUTION:
Never insert tools or other objects into the
propeller fan.
CAUTION:
Never touch electrical components with wet or
damp hands.
CAUTION:
To ensure the performance of the cooling unit,
never block the air inlet.
CAUTION:
With the CWP-100 model, CWP-200, CWP-200 mobile,
CWP-300 and CWP-300 mobile models, they should
NEVER BE
used if the door is opened. Otherwise,
there
would be a distruption of air circulation and
the subsequent failure of the machine.
CAUTION:
All our equipment must be installed by
appropriately trained staff.
More detailed maintenance such as cleaning and
servicing the cooling system must be performed
by authorized technicians who are familiar with
cooling and electrical systems.
CAUTION:
If the supply cord is damaged, it must be replaced by the
manufacturer, its service technicians or similarly qualified
person in order to avoid dangerous situations.
Installation and placement:
After unpacking, place the cooler so that the heat
generated by the cooling unit can be sufficiently
ventilated. The cooler
MUST BE
placed on a
horizontal surface.
COOLER MUST NOT BE PLACED ON ITS SIDE EVEN
DURING TRANSPORTATION.
Conditions of operation:
Our cooling systems are designed to cool liquids with
flow type cooling . These machines have all the
features to ensure the health and safety of the user.
The machine should only be used in the premises of a
normal conditions stated in CSN 33 2000-3 norm. It
must not be placed near any heat source or direct
sunlight. Cooling tank (No. 11)
MUST BE
filled with
clean water and without any chemicals, right up to the
overflow. The machine achieves optimal performance
when used in ambient temperatures from 6°C to
28°C. For correct operation it is important to not cover
any of the ventilation holes.
DO NOT PLACE ANY OBJECTS ON THE COOLER THAT
WOULD BLOCK AIR CIRCULATION.
THE MACHINE MUST NOT BE PLACED NEAR ANY
HEAT SOURCE OR IN DIRECT SUNLIGHT.
Testing:
The product is supplied so that it is ready to use.
Warranty:
There is a 24 month warranty from the date of
purchase on all our equipment and related
components from our production. During this warranty
period we commit ourselves to replace any part free
of charge, which will be covered under the warranty
once recognized by the service center as faulty.
1.
Summary of Contents for AS-110
Page 1: ......
