manualshive.com logo in svg

KROMBACH TUFSEAT Performance Series, Installation, Operation And Maintenance Manual

Share
Download
KROMBACH TUFSEAT Performance Series Installation, Operation And Maintenance Manual Download Page 28

CPE-KROMBACH TUFSEAT-PERFORMANCE FLOATING-IM-EN-A4-2021_07_01

Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website information. 
Crane Co. reserves the right to alter its products without notice, including products already on order provided that such alteration can be made without 
changes being necessary in specifications already agreed. All trademarks in this material are the property of the Crane Co. or its subsidiaries. The Crane 
and Crane brands logotype (CENTER LINE®, COMPAC-NOZ®, CRANE®, DEPA® & ELRO®, DOPAK®, DUO-CHEK®, FLOWSEAL®, GYROLOK®, GO REGULATOR®, 
HOKE®, JENKINS®, KROMBACH®, NOZ-CHEK®, PACIFIC VALVES®, RESISTOFLEX®, REVO®, SAUNDERS®, STOCKHAM®, TEXAS SAMPLING®, TRIANGLE®, UNI-
CHEK®, VALVES®, WESTLOCK CONTROLS®, WTA®, and XOMOX®) are registered trademarks of Crane Co. All rights reserved.

CRANE CHEMPHARMA & ENERGY

Friedrich Krombach GmbH
Armaturenwerke
Marburger Str. 364
57223 Kreuztal, Germany
Tel.: +49 2732 520 00

4526 Research Forest Drive, 
Suite 400
The Woodlands
Texas 77381, U.S.A.
Tel.: +1 936 271 6500

Xomox International GmbH & Co. OHG
Von-Behring-Str. 15
88131 Lindau, Germany
Tel.: +49 8382 702 0

ARMATURE d.o.o.
Koroška cesta 55
2366 Muta, Slovenia
Tel.: +386 2 877 05 00

Crane International Trading (Beijing) Co., Ltd. 
Room 1103,  Capital Tower 11F
6A Jianguomenwai Avenue Chaoyang District
Beijing 100022,  PR China
Tel.: +86 10 6563 9000

Crane Ningjin Valve Co., Ltd. 
No. 496 Jing Long Street
Ningjin County
Hebei Province 055550, PR China
Tel.: +86 319 5808686

Summary of Contents for TUFSEAT Performance Series





























Reviews:

No comments

Brands by name

Popular brands

Load more brands